Various spinning Accessories
Stand Alone Skeinwinder
Attaches to a table and allows users to wind yarn from your bobbins using a hand crank skein winder
Item # SA0100
Niddy Noddy
Made of beech. Adjustable in 2 sizes and collapsable.Item #
SA0101
Stand alone lazy kate
This lazy kate adjusts in pitch and has a built in braking system for each bobbin. Rods can be adjusted for any Louet bobbins
Item # SA0119
S10 Carrying Bag
This is a sturdy bag with strong zippers and is well padded. There are carrying handles as well as a shoulder strap. Requires wheels to be collapsed in order to fit in the bag.
Item # SA0140
S10C Bulky Bobbin
This bobbin will fit with older wheels whose original flyer was a bulky flyer. The Bulky bobbin fits well with current Bulky bobbin and Art yarn flyer. ratios: 1:4 / 1:5 / 1:6, volume: 1240 cm3 (75.4 cubic inch)
Item # SA0112
Standard IrT bobbin
This is the standard lacquered bobbin for all Louët Irish Tension wheels. This bobbin can be used for older wheels too - S10, S51, S20, S60, S70, S71, S75, S76, S77. ratios: 1:5.5 / 1:7.5 / 1:10.5, volume: 670 cm3 (42.4 cubic inch)
Item # SA0102
IrT Highspeed bobbin
This bobbin will fit with all IrT wheels and is ideal for spinning fine spinning. Ratios: 1:6.5 / 1:9.5 / 1:15, volume: 580 cm3 (35.1 cubic inch)
Item # SA0113
Irt fatcore Bobbin
This bobbin will fit with all IrT wheels and is ideal for spinning short fibers and fine spinning. The fatcore will simulate a partially filled bobbin making this type of spinning easier. ratios: 1:6.5 / 1:9.5 / 1:15, volume: 580 cm3 (35.1 cubic inch)
Item # SA0115
Standard ScT bobbin
This is the standard lacquered bobbin for all
Louët Scotch Tension wheels. This includes the Beech Victoria and all S1
0C ScT wheels. There is a seperate bobbin for the Oak Victoria
Item # SA0103
Sct High Speed bobbin
High speed bobbin for Louet scotch tension wheels S10C or Victoria.
Item # SA0114
S17 IRT Bobbin
This bobbin is the same size as the Standard bobbin, but it is unfinished. recommended for the S17, S15 and S75 wheels, who were all sold unfinished. ratios: 1:5.5 / 1:7.5 / 1:10.5, volume: 670 cm3 (42.4 cubic inch)
Item # SA0103
Various bobbins
Louët has additional specific bobbins available for the Olivia, S45, S87, S40 wheels that have all been discontinued, but bobbins remain available.
Irt Flyer w/ hooks
This IrT flyer is for S10C S10, S51, S20, S60, S70, S71, S75, S76, S77.
Item # SA0125
IRT FLYER W/Sliding HOOKS
This IrT flyer is for S10C S10, S51, S20, S60, S70, S71, S75, S76, S77. The sliding hook is manual slid along the arm of the flyer to allow very fine positioning of where the flyer will guide yarn onto your bobbin.
Item # SA0151
IrT Bulky Flyer w/ hooks
This is wide flyer that will accommodate the current bulky flyer as well as the correct replacement flyer for older wheels from the 80's and early 90's whose flyers were similar wide flyers
Item # SA0131
Art Yarn Flyer
This flyer fits all IrT wheels and works with the Victoria Art Yarn Kit. The orifice is huge at 7/8" and has large smooth guides. Ideal for Art yarn.
Item # SA0153
Sct Flyer w/ hooks
This ScT flyer is for S10C and Victoria .
Item # SA0145
Various Flyers
Louët has additional specific bobbins available for the Sct Wheels both sliding hooks and fixed hooks, Olivia, S90, S87, S45, S40 wheels.
Sct High Speed Set
High speed set for Louet scotch tension wheels S10C or Victoria. There is an Oak version for the Oak Victoria. High speed set ratio 1:27 for S10C and 1:20 for Victoria
Item # SA0117 (Beech)
Item # SA0118 (Oak)
Lazy Kate Rack
Louët 2 bobbin lazy Kate rack. There are 2 versions, 1 for IrT version (6mm) or ScT version for (8mm).
Item # SA0122 (IrT)
Item # SA0143 (ScT)
Lazy kate rack holder
Wooden bar to hold lazy Kate rack. The same bar works with both ScT and IrT wheels
Item # SA0121
Victoria 3rd Rod
The Victoria comes with a 2 bobbin Lazy Kate; however, that Kate has a third hole for a third bobbin. This rod expands the Victoria Lazy Kate to a three bobbin Kate.
Item # SA0123
Threading hook
Louët ScT wheel threading hook
Item # SA0142
Victoria carrying case
Padded carrying bag for the Victoria wheel. Handles on top as well as backpack straps. Large front pouch for bobbins etc. There is a lot of extra for fiber and accesories.
Item # SA0141
Art yarn head for victoria
Transforms your Victoria wheel into an Art Yarn wheel. It clamps onto the top of the Victoria’s backpost. The art Yarn head is an IrT system and uses the main Victoria drive wheel with a different drive band. Also need the Art Yarn flyer and bulky bobbin(s) to spin.
Item # SA0136
Top whirl dropspindle
These handy gadgets, printed with sheep heads on the whirl, can be taken anywhere. We have three models available: Top whirl (conventional), Bottom whirl and Octo. All three are un-lacquered. Top whirl weighs 2.82 oz (80 gr)
Item # SP0108
Bottom Whirl Dropspindle
These handy gadgets, printed with sheep heads on the whirl, can be taken anywhere. We have three models available: Top whirl (conventional), Bottom whirl and Octo. All three are un-lacquered. Top whirl weighs 2.82 oz (80 gr)
Item # SP0109